CDVI

Main Features CDVI encoding 40 mm x 33 mm x 4 mm 125 kHz proximity tag Sequential decimal number printed on each tag Pack of 25 tags

Main Features CDVI encoding card 85 mm x 54 mm x .8 mm 125 kHz proximity card Sequential decimal number printed on each card Pack of 25 cards

Main Features CDVI encoding card 85 mm x 54 mm x 1.8 mm 125 kHz proximity card Sequential decimal number printed on each card Pack of 25 cards

Main Features 1.75” x 0.5” x 0.08” (45 mm x 13 mm x 2 mm) 13.56 MHz Pack of 25 cards

*This is not a medical device and should not be used in the diagnosis of any disease or other conditions.Main Features Stand-alone or Wiegand biom...

Main Features Adult height stand for FTC-1000 43 inches (110 cm)

Main Features 3-in-1 standalone solution : mobile, keypad and card reader Proximity distance 164 ft in open space without blocking by metal or con...

Main Features Thin and flexible sticker Recommended installation: interior windshield Passive, battery free tag Pack of 10 stickers Compatible wit...

Main Features (1) A22K controller (2) K1 high security readers (2) Door strikes (ROFU 2400 Kit) (1) Pack of 25 TAG-EV2 Atrium software Master and ...

Includes (1) A22K controller (2) K1 high security readers (1) Pack of 25 TAG-EV2 Atrium software Master and programming cards Main Features Easi...

RADIUM Stand-alone kit including one receiver (WR2LCD) and two 2-channel transmitters (R2T)

Main Features CDVI card format Polycarbonate badge Hexadecimal card number 125 kHz CDVI encoding card 1.3 x 0.2 in (32 x 4 mm) Sold at minimum qua...

Main Features Without metal enclosure Controls 2 doors and 2 readers Convert any A22 door controller to an A22EC elevator controller by simply upd...

Main Features HID encoding tag 1.7 x 1.2 x 0.2 in (44 x 30 x 4 mm) 125 kHz proximity tag Sequential decimal number printed on each tag Pack of 25 ...

Main Features Increase reception and/or range Compatible with all RADIUM receivers 11.5ft (3.5m) coaxial cable (RG 58) included “L”-shaped bracket...

Main Features 16 on-board floor control relays Fire control input Control up to 64 floors and 2 elevator cabs Destination reporting (requires CA-A...

Main Features Stainless steel Dust, weather and vandal resistant Can read: CDVI®, Centaur and most popular 26-bits badge & card format Indoor/...

Main Features Secondary voltage: 16Vac and 24Vac Volt-ampere: 150VA (75VA at 16Vac AND 75VA at 24Vac) Primary voltage: 120V (Fuse protected) Frequ...

Main Features Reads CDVI and most popular 26-bits Wiegand card encoding High performance read range Innovative design Illuminated card reader (blu...

Main Features Interface: 10Base-T /100Base-T Speed: 10/100 Mbps Connector: Rj45 Protocols: UDP, TCP, ARP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, A...

Main Features Up to 85 transmitter keys 1 NO relay + 1 NO/NC relay (24VA) Self-learning memorization Standard pulse output Pulse, latched or delay...

Main Features Output: Wiegand 26 bit Compatible with ATRIUM, CENTAUR or any 26 bit Wiegand-capable systems Power requirements: 12 or 24V (AC or DC...

Main Features Pack of 25 cards Works with PosiProx/Pin/Xtend readers Sequential decimal number printed on each card 85 mm x 54 mm x 1.8 mm

Mounting plate for DGLPFN reader and its variants. Used to fit a single gang box.